智能外墙隔热保温涂料  

Intellectual External Wall Heat Insulation

and Warm Keeping Coating

 产品说明：Product description

     瑞佩姆采用当今国际上先进的新型纳米、空心玻化微珠、真空球、超轻质无机原料，加以高韧性基料复合研制而成的超轻型多用途、隔热保温智能涂料，其综合性能及施工的简易程度、对节能、减排，降耗，低碳、环保具有划时代的战略意义。隔热保温智能涂料，在太阳猛烈的炎热夏季，日照时间内涂层对热源的阻隔、始终保持涂层手感清凉、在寒冷的冬季隔热保温涂料运用自身的热阻功能，有效地阻隔外界的冷空气入侵，同时、又有效地阻隔室内的热量不向外传递，保持室内恒温，而不受外界影响、始终保持室内空间至身于“冬暖夏凉”之中！      
    The ultra light multi-purpose, heat insulation warm keeping intellectual coating of Ruipeimu is made by adopting the internationally advanced novel nano, hollow glass micro ball, vacuum ball, ultra light inorganic raw materials, and high ductility base materials, the product’s comprehensive performance and the simplicity of construction has the cross-era meaning to energy saving, pollution reduction, consumption reduction, low carbon, environment protection. In the hot summer days with strong sun light, the heat insulation warm keeping intellectual coating can block the heat in the duration of sunshine, keeping a cool hand feel of coating; in the cold winter, the coating can block the invasion of external cold air through its own thermal resistance; at the same time, it can block the indoor heat from transmission effectively and keep the constant indoor temperature. The room temperature will not be subjected to external influence and be warm in winter and cool in summer.

产品特点： Product features
1、超轻网状纤维结构、绝热绝缘隔音、密封微孔、透气不透水、耐高温、收缩率低、无缝、无冷桥热桥形成、无冷凝水产生。
2、导热系数低，热阻大、蓄热系数大。
3、与各种基层粘结强度大，不脱落、不龟裂、抗空鼓、抗风压，不受温差影响，耐侯性强。
4、隔热保温效果优异，0.5cm厚度即超过20cm砖墙的隔热保温效果，节能65%。
5、易施工，不需洒水养护，自然干燥固化，冬暖夏凉，减少基层厚度，
6、无毒、防辐射、不腐蚀设备、耐酸碱、环保节能。
7、用腻子喷涂机喷涂，或用普通刮涂 ，到需要的厚度就是，
8、防火、阻燃，达B1 —A级。

1. Ultra light mesh fiber structure, heat insulation, isolation, tightly closed of micro hole, permeable to gas but not to water, high temperature resistant, low shrinkage, seamless, no forming of cold bridge and hot bridge, no forming of condensate water.

2. Low coefficient of heat conductivity, big heat resistance, big heat storage coefficient;

3. Big strength in bonding with various bases, no peeling off, cracking, anti-hollowing, wind-pressure resisting, not be affected by temperature difference, strong weathering resistance.

4. Superior heat insulation and temperature keeping effect, the effect of 0.5mm coating is better than that of 20cm brick in heat insulation and temperature keeping, saving 65% of the energy;

5. Easy in construction, no need watering; adopt natural dry and solidifying, warm in winter and cool in summer, reduce the base thickness.

6. Non toxic, radiation protection, purely natural, do not corrode equipment, acid & alkali resistant, environmental protection and energy saving.

7. Spray with putty spraying unit, or scrub normally to the required thickness.

8. Fire prevention, flame retarding, reaching to grade B1 to A.

                                                                                                                                                                                                                                                                                                 使用方法：1、彻底清洗干净墙体表面的尘土、油渍等污垢，待其干燥；        
2、不用稀释；
3、用量为2.5—3.5L/m2 ,分两遍涂刷，一遍干后涂刷第二遍；           
4、新的混凝土表面需先涂刷一层抗碱底漆；       
Application methods:

1. Clean the dirt, grease on the wall surface thoroughly, keep it dry;

2. Do not dilute;

3. The application dosage is 2.5 to 3.5L/m2, to brush in two times: When the coating of first pass become dry, and then start the second pass;

4. One layer of alkali resistant primer shall be brushed on the surface of new concrete.

      
主要指标： 外观：浆状 、颜色：浅灰色 、导热系数（W/m.k）: 0.03、蓄热系数 ≥1、收缩率 ≤15%、粘结强度 ≥50Kpa、抗拉强度 ≥110、抗压强度 ≥250、干态容重 ≤250包装；20L--50L

Major target:

Appearance: Pulpy; Color: Light grey; Coefficient of heat conductivity (W/m.k): 0.03

Coefficient of heat storage ≥1; Shrinkage≤15%; Bonding strength≥50Kpa; Tensile strength ≥110; Compressive strength≥250; Volumetric weight in dry status≤250

Packing: 20L--50L.