智能隔热防水涂料

Intellectual Heat Insulation Water Proof Coating

产品说明：Product description

     让高层建筑楼顶防水又隔热，是一直困扰世界各国的一大难题。因为漏水和高温，顶层尽管比其它楼层更低价格，但顶层还是遭人嫌弃。目前市场上的隔热砖、空心砖只是权宜之计，防水涂料不但效果不理想，而且使用期太短。涂刷于表面的白色反射隔热涂料在耐污耐候性方面也难信任，使用寿命更短，与混凝土建筑难以匹配。鉴于此，佛山瑞佩姆智能涂料有限公司，经多年的研究，开发出了专用于混凝土顶层楼房的隔热防水涂料三合一单组份水性浆状涂料，可解决顶层楼房易渗水、高温的难题、让你一劳永逸。 

     Realization of water proofness and heat insulation to the roof of high rise building is a very difficult problem to all the countries around the world. The top floor is still disflavoured by consumers despite the lower price than other floors. The application of heat insulation brick, hollow brick are only the temporary measures. The water proof coating is not ideal in effect and short in application duration too. The white reflective heat insulation coating on the surface is hard to believe in anti-pollution and weathering resistance, and it has a very short application life, which is hard to match the permanent concrete building. Basing on that, with years of study, Foshan Peiruimu Intellectual Coating Co., Ltd. had developed the three-in-one single component aqueous pulpy coating, which is a kind of heat insulation water proof coating specially used in the concrete top floor of building; the application of this coating can solve the tough problem of water leakage, high temperature in the top floor of building, which is a once for all solution.

 用途: Applications

适用于混凝土顶层楼房的防水、隔热、抗静电。

Applicable to the water proofness, heat insulation, anti-static electricity of concrete top floor of building.

 施工方法：Construction methods
（1）、在顶层楼面混凝土灌注完毕、干燥后施工，厚度要求3—5mm，每遍刮抹2mm左右，直至达到要求的厚度，待其干燥固化后，再覆盖最后一层水泥沙浆。 
（2）、晴天施工，气温5℃以上，20℃以上为佳，湿度小于80%。 
（3）、工具：钢抹刀、水工抹子。 
（4）、不需加水稀释。

1)Only start construction after the filling of concrete on the top floor is completed and dried; the required thickness is 3 to 5mm; scrape about 2mm in each pass until achieving the required thickness, when it is dried and solidified, to cover with one layer of cement mortar.

2)Start construction in fine weather and the temperature condition of above 5℃, but above 20 ℃ is the best condition, humidity shall be less than 80%.

3) Tools: Steel spatula, hydraulic spatula.

4) No need to add water for dilution 
  用量：每1mm厚度约1L/m2    

Application dosage: The thickness per 1 mm is 1L/m2
  包装规格：20kg/桶，50 kg/桶  

Packing specification: 20kg per barrel, 50 kg per barrel
  储存：密封，存放于阴凉干燥处，储存期一年。 

Storage: Tightly closed, store in the cool and dry area, the storage period is one year.