abstract
Product introduction
- 产品说明
采用国际上的进口TAO,可表面紫外光固化的纯丙 烯 酸乳液为基料、涂膜能在常温或低温环境条件下智能化自动收复裂缝、对水泥砂浆表面上的裂纹进行主动、自动智能修复,使砂浆层免于破裂或皱起,并保持良好的耐沾污性;同时涂层具有很好的“呼吸”透气性能、优异的水分和CO2阻隔性,可防止钢筋的锈蚀及混凝土的老化、可防止潮气在墙壁内的积聚。在广泛的温度条件下具有优异的自动修痕功能,即使在-10℃的低温仍能保持出色持久的自癒性能、涂膜表面可紫外光固化,具有优异的耐久性和耐沾污性;
技术参数:
颜色:白色/彩色、光泽:哑光、干燥时间:表干≤2h(25℃,相对湿度≤80%)、重涂间隔时间:>2h(25℃,相对湿度≤80%)、理论涂布率实:8-12c㎡kg/遍
施工方式 刷涂 辊涂 无气喷涂
稀释比例(漆:水) 100:20-30 100:20-25 100:10-15
施工程序:
1. 新墙应留置两星期以上,使其含水率小于10%,PH值小于10后方可施工,
2. 新墙表面的泥灰、“白霜”、脱膜剂、油污等附着物须用钢丝刷、、有机溶剂或化学洗涤剂除去,并用清水洗净候干
3. 墙面有凹陷,裂缝必须补平,防止漆膜下陷,开裂;孔洞较大的地方填平后需粘贴网格布
4. 旧墙翻新若旧漆膜出现剥落、空鼓、开裂现象,则需彻底铲除,用水洗净,干后才能施工
施工事项:
1. 本品为水性涂料,应避免有机溶剂污染
2. 温度在5℃以下,湿度在85%以上不宜施工,大风天气不宜施工
3. 涂料开罐后请搅拌3~5分钟至均匀
4. 请严格按照产品说明书规定的比例稀释,切勿稀释过量
5. 工程大面积施工时,彩色漆应预留5%原色,用于工程施工完后的小面积整修
6. 注意下雨时不能施工
Recommended products
- ANTI CORROSION COATINGS
- HEAT INSULATION COATINGS
- Transparent glass insulation
- Intelligent self cleaning
- Intelligent oxygen bar
- Recommended products
- Waterproof coating
- Luminescent coating
- Intelligent repairing waterpro
- Intelligent exterior wall coating
- Intelligent transparent glass heat insulation coating
- Intelligent interior wall coating
- Intelligent heat insulation and waterproof coating
- Intelligent heat insulation coating
- Translucent heat insulation coating
- Reflective heat insulation coating
- Invisible self cleaning waterproof coating
- Intelligent color changing coatings
- Intelligent luminous coatings
- Intelligent anti corrosion and heat insulation coating
News
- Heavy weight! Another city in China began to ban the external wall thermal insul
- Guangdong imported thermal insulation coatings - Intelligent waterproof and ther
- Price of smart interior wall coatings - Recommended smart sunscreen and heat ins
- Thermal insulation coatings information - new intelligent cooling coatings
- Guangdong waterproof coating manufacturer_ High performance and price invisible